Performance Specifications NEX15

Models		1E (Standard)
Screw diameter (mm)		A 16	B 19
Injection capacity (cm³)		10	16
Plasticization capacity [PS] (kg/h)		8	13
Max. injection pressure (MPa [kgf/cm²])		255 [2600]	196 [2000]
Injection rate (cm³/s)	Standard	101	142
	High velocity
	High load	70	99
Injection velocity (mm/s)	Standard	500
	High velocity
	High load	350
Screw velocity (rpm)		0 ~ 400
Hopper capacity (Optional)		15
Clamping force (kN [tf])		147 [15]
Clamping stroke (mm)		160
Mold thickness [min. - max.] (mm)		130 ~ 260
Max. daylight opening (mm)		420
Tie bar clearance [H x V] (mm)		260 x 260
Die plate dimensions [H x V] (mm)		370 x 370
Min. mold dimensions [H x V] (mm)		180 x 180
Locating ring diameter (mm)		60
Ejector stroke (mm)		50
Heater band capacity (kW)		2.95	3.16
Machine dimensions [L x W x H] (m)		2.50 x 0.86 x 1.46
Floor dimensions [L x W] (m)		2.25 x 0.66
Machine weight (t)		1.7

	Actual plasticizing capacity may vary, depending on the molding conditions and materials used.
	The maximum injection pressure denotes the output of the injection unit, not the resin pressure.
	The maximum injection pressure is the highest value that can be set on the machine.The value may be limited, depending on the molding conditions.
	The maximum injection rate in the table is the estimated value that was derived from a formula, and it is not guaranteed value at the maximum injection pressure.
	The clamping force on the table may be lower when a mold smaller than the indicated minimum mold size is used.
	The specifications are subject to change without notice due to performance upgrades.
	1MPa=10.2kgf/cm²10kgf/cm², 1kN=0.102tf0.1tf
*	Selecting 14mm screw for NEX15 is available. Please contact us for more details.