Specification item 50E (Standard) 71E Screw diameter (mm) AA 45 A 50 B 56 AA 50 A 56 B 63 Injection capacity(cm3) 326 403 505 442 554 701 Plasticization capacity [PS] (kg/h) 91 115 155 115 156 209 Max. injection pressure (MPa [kgf/cm2]) 243 197 157 249 199 157 Injection rate (cm3/s) Standard 278 344 431 314 394 499 High velocity 382 471 591 393 493 623 High load 286 353 443 314 394 499 Injection velocity (mm/s) Standard 175 160 High velocity 240 200 High load 180 160 Screw velocity (rpm) 0�`250 0�`250 Nozzle touch force (kN) 23 29 Hopper capacity [Optional] (L) 90 90 Clamping force (kN [tf]) 2160[220] 2160[220] Clamping stroke (mm) 530 530 Mold thickness [min. - max.] (mm) 275�`560 275�`560 Max. daylight opening (mm) 1090 1090 Tie bar clearance [H x V] (mm) 590�~590 590�~590 Die plate dimensions [H x V] (mm) 850�~850 850�~850 Min. mold dimensions [H x V] (mm) 415�~415 415�~415 Locating ring diameter (mm) 120 120 Ejector force (kN) 59 59 Ejector stroke (mm) 120 120 Heater band capacity (kW) 14.62 18.19 17.74 21.98 Main breaker capacity�iA�j 150�i175�j 150�i175�j Machine dimensions [L x W x H] (m) 6.01�~ 1.49�~ 2.00 6.23�~1.49�~2.00 6.04�~ 1.56�~ 2.00 6.31�~1.56�~2.00 Floor dimensions [L x W] (m) 5.49�~1.05 5.53�~1.05 Machine weight (t) 10.6 12.3 Actual plasticizing capacity may vary, depending on the molding conditions and materials used. The maximum injection pressure denotes the output of the injection unit, not the resin pressure. The maximum injection pressure is the highest value that can be set on the machine. The value may be limited, depending on the molding conditions. The maximum injection rate in the table is the estimated value that was derived from a formula, and it is not guaranteed value at the maximum injection pressure. The clamping force on the table may be lower when a mold smaller than the indicated minimum mold size is used. The specifications are subject to change without notice due to performance upgrades. 1MPa=10.2kgf/cm2≒10kgf/cm2,1kN=0.102tf≒0.1tf back

(C)2004 Nissei Plastic Industrial Co., Ltd.