Performance Specifications NEX460

Specification item		140LE (Standard)		210LE
Screw diameter (mm)		A 63	B 71	A 80	B 90
Injection capacity(cm³)		1107	1406	2111	2672
Plasticization capacity [PS] (kg/h)		209	246	277	375
Max. injection pressure (MPa [kgf/cm²])		201	158	186	147
Injection rate (cm³/s)	Standard	499	633	804	1018
	High velocity	-	-	-	-
	High load	-	-	-	-
Injection velocity (mm/s)	Standard	160		160
	High velocity	-		-
	High load	-		-
Screw velocity (rpm)		0 ~ 250	0 ~ 210	0 ~ 160
Nozzle touch force (kN)		39		39
Hopper capacity [Optional] (L)		90		90
Clamping force (kN [tf])		4510[460]		4510[460]
Clamping stroke (mm)		800		800
Mold thickness [min. - max.] (mm)		375 ~ 770		375 ~ 770
Max. daylight opening (mm)		1570		1570
Tie bar clearance [H x V] (mm)		820 x 820		820 x 820
Die plate dimensions [H x V] (mm)		1190 x 1190		1190 x 1190
Min. mold dimensions [H x V] (mm)		580 x 580		580 x 580
Locating ring diameter (mm)		150		150
Ejector force (kN)		98		98
Ejector stroke (mm)		160		160
Heater band capacity (kW)		28.4		35.62
Machine dimensions [L x W x H] (m)		8.00 x 1.96 x 2.30		8.73 x 1.96 x 2.30
Floor dimensions [L x W] (m)		7.34 x 1.53		8.08 x 1.53
Machine weight (t)		26.2		27.6

*	Hydraulic pressure is used for nozzle touch operation in NEX460-140LE.
*	The delivery time for specifications may take longer. Contact us for more details.
	Actual plasticizing capacity may vary, depending on the molding conditions and materials used.
	The maximum injection pressure denotes the output of the injection unit, not the resin pressure.
	The maximum injection pressure is the highest value that can be set on the machine. The value may be limited, depending on the molding conditions.
	The maximum injection rate in the table is the estimated value that was derived from a formula, and it is not guaranteed value at the maximum injection pressure.
	The clamping force on the table may be lower when a mold smaller than the indicated minimum mold size is used.
	The specifications are subject to change without notice due to performance upgrades.
	1MPa=10.2kgf/cm²≒10kgf/cm²,1kN=0.102tf≒0.1tf