Specification item 400L 600L Screw diameter (mm) 100 112 112 125 Injection capacity (cm3) 4000 5020 6010 7480 Plasticization capacity [PS] (kg/h) 416 555 580 785 Injection pressure (MPa [kgf/cm2]) 167 [1710] 133 [1365] 171 [1750] 138 [1405] Injection rate (cm3/s) 1099 1379 1182 1473 Injection velocity (mm/s) 140 120 Screw rotation speed (rpm) 0~125 0~120 Hopper capacity [Optional] (L) 90 90 Camping force (kN [tf]) 8410 [858] 8410 [858] Clamping stroke (mm) 1175 1175 Mold thinkness [min.-max.] (mm) 500~1075 500~1075 Max. daylight opening (mm) 2260 2260 Tie bar clearance [H x V] (mm) 1330 x 1330 1330 x 1330 Die plate dimensions [H x V] (mm) 1800 x 1800 1800 x 1800 Min. mold dimensions [H x V] (mm) 880 x 880 880 x 880 Ejector stroke (mm) 200 200 Pump motor (kW) 30kW x 3 + 4.5kW 37kW x 3 + 4.5kW Heater band capacity (kW) 46.30 57.50 Hydraulic oil capacity (L) 1800 1800 Machine dimensions [L x W x H] (m) 11.29 x 2.59 x 2.55 11.76 x 2.59 x 2.55 Floor dimensions [L x W] (m) 10.19 x 1.84 10.69 x 1.84 Machine weight (t) 39.4 40.4 Power supply (V) 3-phase AC400V (380V~480V) 3-phase AC400V (380V~480V) The power supply voltages of FVX machines of above spec sheet is 3-phase AC400(380V~480V). AC200V(200V~230V) specifications are also available; however, the machine dimensions will change. Since the lead time may take longer in such cases, please contact us for more information. Actual plasticizing capacity may vary, depending on the molding conditions and materials used. The maximum injection pressure is the highest value that can be set on a machine. The value may be limited, depending on the molding conditions. The injection rate is the estimated value at the maximum injection pressure. The specifications are subject to change without notice due to performance upgrades. 1MPa=10.2kgf/cm210kgf/cm2, 1kN=0.102tf0.1tf back

(C)2004 Nissei Plastic Industrial Co., Ltd.